Nudo Architectural Panels

Endurex Laminated Panels

Available in a painted, or anodized aluminum finish.

A line of exterior architectural products focused on extending the life of the building. These infill / glazing panels offer various finish options to provide design flexibility as well as insulation options to meet your buildings envelope requirements.
Select an option below to learn more about the products within each category.

Endurex 300 Series 1/4″ Panels 

 Endurex 500 Series Insulated

 EnduroBond ACM Panels 

 

 

Veneer

The Endurex line of exterior architectural products focuses on extending the life of the building.  The Endurex 300 is the most innovative “next generation” glazing and storefront panel available. 

Endurex 300 

 This 1/4″ in-fill panel features smooth or embossed Aluminum on both sides of a solid thermoplastic core. Endurex 300 combines all the best features of moisture and impact resistance with excellent rigidity.  Although just as economical as traditional hardboard, Endurex 300  provides unmatched durability.

Available in a Polyester painted finish.

Endurex 315

The Endurex 315 is a 1/4″ glazing panel that features .032″ Kynar or Anodized finished Aluminum on both sides of a corrugated plastic core, which allows virtually no moisture absorption. Corrugated plastic is less rigid and impact resistant than composite or hardboard stabilizers, but is lighter in weight.

Available in a Kynar paint or anodized aluminum finish.

Endurex 325

The Endurex 325 is a 1/4″ glazing panel that features .032″ smooth or embossed Aluminum on both sides of a tempered hardboard core. The hardboard is more rigid and impact resistant than a corrugated stabilizer, but can absorb moisture if panel is not properly sealed.

Available in a Kynar paint or anodized aluminum finish.

Insulated Glazing Panels

The Endurex 500 Series provides energy savings while enhancing the life and the aesthetics of your building exterior.

 Endurex 500

Nudo’s innovative Endurex 500 combines all the benefits of Moisture Resistant ACP/ACM panels with a foam-insulating core. Rather than standard hardboard stabilizers that can absorb water, or even the next generation of corrugated plastic stabilizers, which have less rigidity and impact resistance, the Endurex 500 panel has solid plastic core stabilizers backed by an extra layer of smooth or embossed aluminum behind each stabilizer. 

Endurex 500 panels are manufactured to meet the requirements of a standard 1″ insulated glazing panel. Panel thickness is available from as thin as 7/8″ to 4″ thick.

Endurex 515 

The Endurex 515 is a standard 1″ insulated glazing panel with corrugated plastic stabilizers on both sides of a 2lb EPS foam core. The Endurex 515 is more moisture resistant than the Endurex 525, but provides less impact resistance than the Endurex 505, 525, 535 or 555.

The Endurex 515 is available in a Kynar or Anodized finished aluminum. Endurex 515 panels are manufactured to meet the requirements of a standard 1″ insulated glazing panel. Panel thickness is available from as thin as 7/8″ to 4″ thick.

Endurex 525

The Endurex 525 is the most traditional 1″ insulated panel using tempered hardboard as stabilizers around a 2lb EPS foam core. Although still specified, the Endurex 525 panel does not offer the moisture and impact resistance found in the Endurex 505 and 555.

The Endurex 525 is available in a Kynar or Anodized finished aluminum. Endurex 525 panels are manufactured to meet the requirements of a standard 1″ insulated glazing panel. Panel thickness is available from as thin as 7/8″ to 4″ thick.

Nudo Products, Inc.
1500 Taylor Avenue
Springfield, IL 62703

Toll Free: (800) 826-4132

Email: info@nudo.com

www.nudo.com